Enable Synchronization-Switch - Avaya Definity SI Maintenance Manual

enable synchronization-switch

Action/
Object Qualifiers
enable board/port
suspend- location
alm- orig
off-board-o
nly
expires-in-
hrs
enable synchronization-switch
This command re-enables automatic clock switching or returns the maintenance
subsystem back to the normal state. The synchronization subsystem consists of
the TDM bus clock, DS1 trunk board, and SPE-resident maintenance and
administration software and provides error free digital communication between
the switch and other PBXs, COs, or customer-premise equipment (CPE).
Action/Object
enable
synchronization-switch
555-233-123
Qualifier
Description
Physical location of
the hardware
optional; if not
specified, both on-and
off-board alarms
suspended
No. of hours (1-72)
Examples:
enable
suspend-alm-orig
1B03 expires-in-hrs 3
enable
suspend-alm-orig
1B0701
expires-in-hrs 72
enable
suspend-alm-orig
1B07 off-board-only
expires-in-hrs 24
Qualifier
Qualifier Description
Logins Defaults
init Both on- and
inads off-board
craft alarms if the
cust off-board-
rcust only keyword
is not specified
Logins Defaults
init none
inads
craft
Issue 4 May 2002
Feature
Interactions
none
Feature
Interactions
none
8-133