Release Packet-Control - Avaya Definity SI Maintenance Manual

release packet-control

release packet-control
This command activates the packet-control circuit pack, and reestablishes each
terminated point-to-point signaling link on this packet-control. It is the complement
to busyout packet-control, which deactivates packet control and destroys
terminated point-to-point signaling links.
Action/
Object Qualifier Qualifier Description
release location simplex = location parameter not used.
packet-
Duplicated = packet control carrier
control
(1A or 1B)
Examples: release packet-control 1A
Feature Interactions
High or Critical Reliability Systems disallow attempts to release the packet-control
that resides in the standby control complex.
When packet-controls in the active control complex are released from previous
busied-out states, connectivity across Packet Buses reestablish. ISDN-BRI
point-to-point signaling links reestablish with release packet-control.
Output
The following output example is a display of release packet-control 1A.
release packet-control 1A
Port Maintenance Name
1A PKT-CTRL
Command successfully completed
Field descriptions
Port
Maintenance Name
Alt. Name
Result
Error Code
555-233-123
release packet-control 1B
COMMAND RESULTS
Alt. Name Result
PASS
Cabinet-Carrier where Packet-Control resides.
PKT-CTRL.
Not applicable.
Success status of a busied out object (PASS, ABORT, FAIL).
System-generated description of a command failure.
Logins Defaults
init simplex = cabinet
inads 1, carrier A.
craft
duplex = cabinet
1. (no default
carriers.)
Error Code
Issue 4 May 2002
Feature
Interactions
see below
8-259