Set Tdm - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids

set tdm

This command establishes the TDM bus on a port network that houses control
channels and dedicated tones.
Action/
Object Qualifier Qualifier Description
set tdm port specifies the Port Network number of the TDM
network bus.
pn ("a" or "b") specifies desired half of the TDM
number bus. Configure each 512 time slot TDM bus as
bus two duplicate 256 time slot buses, allowing
duplication of control channels and dedicated
tone time slots.
bus A port network number (1 - 3) forces the setting
override of a deactivated bus, or a bus whose dedicated
tone time slots are active.
Examples:
set tdm port-network 2 bus a
set tdm port-network 2 bus b override
Feature Interactions
New calls go to time slots reserved for tones on the bus that have not other time
slots when:
Time slots on a specified bus are in use
Dedicated tone time slots are on the other half of the bus
A set command to buses that have calls on dedicated tone time slots drops these
calls.
8-294 Issue 4 May 2002
Feature
Logins Defaults Interactions
init none see below
inads
craft
555-233-123