Alarm-Pt (Alarm Port) - Avaya Definity SI Maintenance Manual

ALARM-PT (ALARM PORT)

ALARM-PT (ALARM PORT)
MO Name (in
Alarm Log)
ALARM-PT
ALARM-PT
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the
carrier designation (for example, A, B, C, D, or E); SS is the address of the slot in
the carrier where the circuit pack is located (for example, 01, 02,...,etc.); and pp
is the 2-digit port number (for example, 01).
The Alarm Port Maintenance Object provides on-board maintenance for an
analog line port that is administered as an external device alarm port. Tests are
provided to verify the analog line port's ability to detect an external device alarm.
The External Device Alarm (EXT-DEV) Maintenance Object is used for the
off-board external device alarm.
555-233-123
Alarm Initial Command to
Level Run
MIN test port PCSSpp l
WRN test port PCSSpp sh
1
Full Name of MO
Alarm-Port
Alarm-Port
Issue 4 May 2002 10-43