Avaya Definity SI Maintenance Manual page 1140

Maintenance Object Repair Procedures
Memory Card Format and Read Test (#696)
This is a non-destructive test, which reads the directory file from the memory card,
and verifies the integrity of the directory file.
Table 10-137. TEST #696 Memory Card format and Read Test
Error Code
2012
2106
2114
2013
2100
none
2108
2110
10-354 Issue 4 May 2002
Test
Result Description/Recommendation
ABORT Internal System Error.
1. Retry the command at one minute intervals a maximum
of five times.
2. If the test continues to abort, escalate the problem.
ABORT Could not allocate the necessary system resources to run
this test.
1. Retry the command at one minute intervals a maximum
of five times.
2. If the test continues to abort, escalate the problem.
ABORT The NETCON circuit pack is not a TN777B circuit pack.
1. Follow the Standard Repair Procedures for replacing the
NETCON circuit pack with the TN777B circuit pack.
2. Re-enter the test card-mem command.
ABORT No memory card is inserted.
1. Insert a formatted memory card into the slot at the
TN777B NETCON circuit pack.
2. Retry the command at one minute intervals a maximum
of five times.
3. If the test continues to abort, escalate the problem.
Continued on next page
555-233-123