Avaya Definity SI Maintenance Manual page 565

status bri-port
Table 8-10. Status BRI-Port Command Interpretation — Continued
Endpoint TEI
Types Range Layer 2 State
BRI, 64- L3-
ASAI 126 Established
BRI 64- L3-
126 Established
BRI 0-126 L3-
Established
555-233-123
Voice Service
Extension SPID Description /Recommendation
blank yes Technicians conduct SPID
facilitation tests on the port. Links
are not associated with BRI port
endpoints. See description of SPID
Facility Test Procedures in the
''BRI-SET, ASAI-ADJ, BRI-DAT''
Maintenance documentation.
ext yes Technicians conduct SPID
facilitation tests on the port. Links
are associated with port endpoints.
See description of SPID Facility
Test Procedures in the
ASAI-ADJ, BRI-DAT''
documentation.
blank blank Invalid SPID assigned to link.
''BRI-SET,
Maintenance
1. Change the SPID value in the
BRI endpoint to match the SPID
administered to the BRI
endpoint on the port. Verify the
repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of
the BRI endpoint is
L3-Established.
Continued on next page
Issue 4 May 2002 8-315