Release Access-Endpoint - Avaya Definity SI Maintenance Manual

release access-endpoint

release access-endpoint
This command removes all ports associated with the specified access endpoint
from a maintenance busy state. Periodic and scheduled tests subsequently
resume on the released ports. Maintenance completes background initialization
testing on the released ports. For details of the test sequence, refer to [3].
Action/
Object Qualifier
release extension
access-
endpoint
Output
The following example shows the output from the release access-endpoint
22502 command and assumes that the access endpoint ports for extension
22502 are in cabinet 1, carrier C, slot 11, circuit 1 to 6.
release access-endpoint 22502
Port Maintenance Name Alt. Name
01C1101 WAE-PORT
01C1102 WAE-PORT
01C1103 WAE-PORT
01C1104 WAE-PORT
01C1105 WAE-PORT
01C1106 WAE-PORT
Command Successfully Completed
Field descriptions
Port
Maintenance Name
Alt. Name
Result
Error Code
555-233-123
Qualifier Description
number associated with desired access
endpoint.
Examples:
release access-endpoint 25012
release access-endpoint 77868
page 1 of 1
COMMAND RESULTS
Result
22502 PASS
22502 PASS
22502 PASS
22502 PASS
22502 PASS
22502 PASS
Port address (cabinet-carrier-slot-circuit) of released
maintenance.
The type of released maintenance object. (wideband access
point =WAE-PORT, single port access endpoint = TIE-DS1.
Alternate way to identify maintenance objects. This field
contains the extension number of the access endpoint.
Success status of a busied out object (PASS, ABORT, FAIL)
System-generated description of a command failure.
Logins Defaults
init none
inads
craft
nms
Error Code
Issue 4 May 2002
Feature
Interactions
none
8-251