List Trace - Avaya Definity SI Maintenance Manual

list trace

Trunks Failed
Marginal
Threshld
Trunks Failed
Unaccept
Threshld
Trks In-Use
Trks Not Test
Busied Out
Trunks
list trace
Use this command to troubleshoot misdirected calls, trunking/routing problems,
and call denials. This command allows you to view the Virtual Path Identifier (VPI)
and Virtual Channel Identifier (VCI) data, adding either of these qualifiers:
list trace station
list trace tac
Action/Object Qualifier
list trace station
tac
list trace station
Use this command to check the VPI.VCI data for a specified station (list trace
station extension). The command syntax for ATM-specific trace data is:
list trace station xxxxx/a where xxxxx is the station number, and /a
means that you are requesting ATM-specific data.
Screen 8-16
descriptions (list trace)
555-233-123
The number of trunks that failed a marginal threshold, but not an
unacceptable threshold according to the threshold values defined
on the trunk group form.
This is taken from the unacceptable threshold administered on the
Trunk group form.
The number of trunks that were in-use at the time of testing.
The number of trunks that were not tested due to error conditions.
The number of trunks that were busied out at the time. This could
be due to hardware problems, incorrect threshold values, etc.
Qualifier Description
VPI.VCI data for a specific station
VPI.VCI data for a specific
trunk/member
shows VPI.VCI data for a successful 2-party call setup. Use the
to interpret this report.
Feature
Logins Default Interactions
init
inads
craft
customer
Issue 4 May 2002
Field
8-219