Set Expansion-Link; Set Options - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids

set expansion-link

The set expansion-link command sets the Expansion-Interface Link between:
the PPN and an EPN
two EPNs to a specific Interface Link circuit pack between PPN and EPN.
NOTE:
This command can corrupt any active data links between the PPN and an
EPN or between two EPNs.
Action/Object Qualifier
set link-
expansion-link identifier

set options

This command enables the technician (that is, remote user with INADS
permission) to select which types of maintenance categories report alarms
automatically and which types require customer call-in. Judicious use of this
command can reduce the number of ineffective alarms to the TSC. For effective
results, technicians should use the set options command default settings
specified in this section. Technicians should not change these settings. Special
circumstances (for example, special studies) may require temporary changes
under the guidance of Tiers 3 and 4.
NOTE:
Alarms do not upgrade.
Action/Object Qualifier
set options
8-286 Issue 4 May 2002
Qualifier Description
1A01, 1A02, 1B01, 1B02, 2A01, 2A02,
2B03, 3A01, 3A02, 3AB02, 3B03).
Examples:
set expansion-link 02a01
set expansion-link 3a02
Qualifier Description
Feature
Logins Default Interactions
init none none
inads
craft
Feature
Logins Defaults Interactions
init see below none
inads
555-233-123