Recycle Carrier - Avaya Definity SI Maintenance Manual

recycle carrier

recycle carrier
This command recycles power for specified carriers. When power units are
replaced in carriers, this command recycles that carrier's power. Processor
carriers and their duplicates and EPN control carriers or SCC carriers cannot be
recycled. Carriers with active, recycled EIs, experience disrupted communications
with their cabinets. Carriers with active, recycled tone-clock boards experience
disrupted service for ports in port networks. For more details on recycling and
trouble shooting power units, refer to "Troubleshooting Control Carrier Power
Units" in Chapter 5, ''Routine Maintenance
Action/
Object Qualifier Qualifier Description
busyout location Physical location of desired carrier.
mis
Carrier b-e. (b not applicable for SPE
duplex PPNs)
Feature Interactions
Carrier "a" cannot recycle its power. When carrier "b" of the PPN contains SPE
duplication hardware, it cannot recycle its power.
Recycling maintenance objects results in:
Recycled component
Port Carriers
Carriers with active
EIs
Carriers with active
tone-clock boards
Carrier
The test tdm command accelerates retirement of these problems.
555-233-123
Procedures''.
Logins
init
inads
craft
Result
Interrupted service
Disrupted communication with that cabinet
Interrupted service for ports port network
The list configuration command causes circuit packs to
display red LEDs and NO BOARDs.
Feature
Default Interactions
cabinet = 1 see below
none for
carrier
Issue 4 May 2002 8-247