Avaya Definity SI Maintenance Manual page 470

Maintenance Commands and Trouble-Clearing Aids
list trace station 52501/a
Time Data
15:12:07 Calling party station
15:12:09 dial 52501
15:12:09 ring station 52501 cid 0x20
15:12:09 ATM setup PN01-0081 to PN03-0045
15:12:09 ATM setup PN03-0046 to PN01-0082
15:12:11 active station 52501 cid 0x20
15:12:22 idle station 57405 cid 0x20
Screen 8-16. List trace screen (list trace station)
list trace tac
Use this command to see the VPI.VCI data for a specified trunk. The command
syntax for ATM-specific trace data is list trace tac xxx/a, where
xxx is the trunk access code number.
/a means that you are requesting ATM-specific data.
Field descriptions (list trace)
Time The system time that the event in the data field occurred
Data A description of the event:
setup indicates a successful ATM setup
fail indicates an unsuccessful ATM setup or the network released an SVC
after setup
rele(ase) DEFINITY has sent an SVC-release message (This is unlikely
because the call being traced has already ended by the time the
SVC-release message is sent.)
add indicates that a party has been added to an SVC
rej(ect) indicates a rejected ATM-EI add-party message
drop indicates that DEFINITY sent an SVC drop-party message.
save indicates that an SVC has been saved in the DEFINITY ATM cache
reuse indicates that an SVC in the DEFINITY ATM cache has been reused
8-220 Issue 4 May 2002
Page 1 of 1
LIST TRACE
57405 cid 0x20
SPE B
555-233-123