Avaya Definity SI Maintenance Manual page 695

test hardware-group
Table 8-16. Test of 'all ports' option for the following boards: — Continued
Board
Number
TN722B
TN726B
TN742
SPE-interchange?
Output
The following example shows the output for the test hardware-group system
command and assumes that the board in port network 1, carrier c, slot 7 is an
analog board with three administered ports and test sequence repeat = 3.
Responses to this command running in the foreground display on a test-by-test
basis with one line of data for each test result.
test hardware-group system
Port Maintenance Name
01C07 ANL-BD
01C07 ANL-BD
01C0703 ANL-LINE
01C0702 ANL-LINE
01C0703 ANL-LINE
01C0701 ANL-LINE
01C0702 ANL-LINE
01C0703 ANL-LINE
01C0702 ANL-LINE
01C0701 ANL-LINE
01C0701 ANL-LINE
Testing system, 11070 of 12300 (90%) MOs tested for repetition 1
555-233-123
Description
DS1 Tie Trunk
Data Line
8 port Analog Line
Allow for planned interchange of duplicated SPEs and
subsequent testing of both the active and standby SPEs.
TEST RESULTS
Alt. Name Test No. Result
Board
Number Description
TN2146 Direct Inward Dialing Trunk
TN2147 Central Office Trunk
TN2149 Analog Line
TN2180 16 port Analog line
Continued on next page
51 PASS
52 PASS
35 PASS
35 PASS
48 PASS
35 PASS
48 PASS
36 PASS
36 PASS
48 PASS
36 PASS
Issue 4 May 2002
Error Code
8-445