Avaya Definity SI Maintenance Manual page 1091

BRI-SET, ASAI-ADJ, BRI-DAT
Table 10-120. ISDN-BRI Cause Values — Continued
Code
65
69
ADJUNCT/SWITCH ERROR CONDITIONS
81
System Technician-Demanded Tests: Descriptions
and Error Codes
When inspecting errors in the system and deciding which ones to address, always
investigate errors associated with the circuit pack and port first. Clearing these
error codes first may also clear errors generated against the endpoint. When all
circuit pack and port errors have been cleared, and errors still exist against the
endpoint, always investigate errors in the order they are presented in the table
below. By clearing error codes associated with the Signaling Link Status Test, for
example, you may also clear errors generated from other tests in the testing
sequence.
555-233-123
Explanation
Bearer Service Requested service not implemented in switch or
Not Implemented endpoint.
Requested Requested service not supported in switch or
Facility Not endpoint.
Implemented
1. Consult switch and endpoint documentation
to determine service support.
2. If Step 1 does not resolve the problem,
escalate to the next tier.
Invalid CRV An invalid CRV was sent by the adjunct.
1. This may indicate a CRV inconsistency
between the switch and the adjunct. See the
CallVisor protocol reference manual.
2. If step 1 does not resolve the problem,
escalate to the next tier.
Recommendation
Continued on next page
Issue 4 May 2002 10-305