Avaya Definity SI Maintenance Manual page 646

Maintenance Commands and Trouble-Clearing Aids
EXP-LINK
SERVICE STATE
MODE
CABINET TYPE
8-396 Issue 4 May 2002
Expansion Links that originate from this cabinet and the
locations of the two Expansion Interface circuit packs that
make up the link. If the Expansion Link does not exist in the
system then a dash ( ) displays.
-
Expansion Link identifiers for the PPN or Cabinet 1:
1A01-2A01 , 1B01-2B02
1B02-3B02
Expansion Link identifiers for the first EPN or Cabinet 2:
,
1A01-2A01 1B01-2B02
2B03-3B03
Expansion Link identifiers for the second EPN or Cabinet
3:
1A02-3A01 , 1B02-3B02
2B03-3B03
Operational state of the Expansion Interface Link:
in: Expansion Interface Link installed and is in-service
out: Expansion Interface Link failed certain maintenance
tests and has been removed from service
<blank> Expansion Interface Link does not exist
active : Expansion Interface Link is in-service and
providing the active connectivity between the two
cabinets.
standby : Expansion Interface Link is in-service and
ready to provide connectivity between the two cabinets
should the active link fail.
down : Expansion Interface Link is out-of-service and
cannot provide connectivity between the two cabinets.
<blank> Expansion Interface Link does not exist
MCC : Medium Carrier Cabinet (up to 5 carriers, simplex
or duplex as a PPN)
SCC : Single Carrier Cabinet (up to 4 carriers, simplex or
duplex as a PPN)
: Enhanced Medium Carrier Cabinet (up to 5
EMCC
carriers, can only be a simplex or duplex PPN cabinet)
: Enhanced Medium Carrier Cabinet (up to 4
ESCC
carriers, can only be a simplex or duplex PPN cabinet)
MICRO : Micro or wall-mounted cabinet (always exists
alone as an A carrier in a simplex PPN)
, 1A02-3A01 ,
, ,
2A02-3A02
, 2A02-3A02 ,
555-233-123