Avaya Definity SI Maintenance Manual page 1270

Maintenance Object Repair Procedures
NPE Audit Test (#50)
The system updates the network connectivity information for all the NPEs on the
circuit pack through message to the on-board microprocessor. This test is
non-destructive.
Table 10-175. TEST #50 NPE Audit Test
Error
Code
2100
1019
Control Channel Loop Around Test (#52)
This non-destructive test queries the circuit pack for its code and vintage. This test
also verifies the circuit pack records.
Table 10-176. TEST #52 Control Channel Loop Around Test
Error
Code
10-484 Issue 4 May 2002
Test
Result
ABORT Could not allocate the necessary system resources to run this
test.
ABORT Could not allocate the necessary system resources to run this
test.
ABORT Test already in progress.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5
times.
PASS Circuit pack NPEs and translation updated.
Test
Result
ABORT Could not allocate the necessary system resources to run this
test.
FAIL Internal system error
1. Retry the command at 1-minute intervals, up to 5 times.
PASS Successful communication with circuit pack.
Description/Recommendation
Continued on next page
Description/Recommendation
555-233-123