Monitor System - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids

monitor system

The monitor system view1 and view2 commands summarize the system's
condition. This on-line status report automatically updates every minute (or by
pressing the UPDATE key) until the command is canceled by pressing the
CANCEL key. For security reasons, cancel automatically logs off technicians.
Overall system status is available with either view option. "View1" displays
attendant, maintenance, and traffic status. Attendant and maintenance status
update every minute and traffic status updates hourly. "View2" displays all "view1"
items, except hunt group measurements that are omitted from traffic status
portions. These screens contain simplified high-level information about the
system's health. The monitor system conn command displays connection's
status in the connection manager process. Data is collected frequently in the
connection manager for key information items used to create this report.
The single option is monitor system conn and its parameter is pnn. The
command line parameter pnn indicates the desired 3 pnns.
Action/
Object Qualifier
monitor view 1
system view 2 conn
pnn ###
pnn ###
pnn ###
Qualifier Description
view1
view2
conn
no
options
pnn # # #
8-230 Issue 4 May 2002
Qualifier Description
see below
Examples:
monitor system view1
monitor system view2
monitor system conn
monitor system conn pnn 1 5 7
This screen displays attendant status, maintenance status, last hour's
measurement of trunk groups, hunt groups, attendant groups, and the
time of day.
This screen displays view1 forms except the last hour's hunt group
measurements.
This option displays the connection monitor output for key information.
Omitting "pnn # # #" displays the default configuration of Pnn's 1, 2 and 3.
Entering "pnn # # #", where "#" is replaced by a pnn number from 1 to 3,
displays data for specified pnns.
Feature
Logins Default Interactions
init none none
inads
craft
cust
nms
browse
555-233-123