Status Ip-Board - Avaya Definity SI Maintenance Manual

status ip-board

status ip-board
status ip-board CCcss
The status ip-board command has the same syntax and output as the status
c-lan-ip command except the list of allowed boards is larger. The command can
be run on either a TN799 or a TN2302.
NOTE:
This SAT command cannot be run on the other IP-capable DEFINITY board,
the MAPD, although somewhat similar commands can be carried out
through the MAPD's operating system.
The command status ip-board CCcss returns the data in the first two columns of
the following table. The form also shows the time of the last port reset, the last
hour start time and end time for the error counter statistics.
Table 8-15. status c-lan-ip CCcss
Field Name on
output type
switch output
Incoming data- Counter
gram header
errors
Outgoing data- Counter
grams with no
route available
Incoming data- Counter
grams received
555-233-123
MIB data
Long ipInHdrErrors
Long ipOutNoRoutes
Long ipInReceives
Description
The number of input datagrams dis-
carded due to errors in their IP head-
ers, including bad checksums,
version number mismatch, other for-
mat errors, time-to-live exceeded,
errors discovered in processing their
IP options, etc.
The number of IP datagrams dis-
carded because no route could be
found to transmit them to their desti-
nation. Note that this counter
includes any packets counted in
ipForwDatagrams which meet this
`no-route' criterion. Note that this
includes any datagrams which a host
cannot route because all of its default
gateways are down.
The total number of input datagrams
received from interfaces, including
those received in error.
Continued on next page
Issue 4 May 2002 8-367