Restore Announcements - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids

restore announcements

This command copies announcement data from the active MSS devices to
announcement boards.
Action/
Object Qualifier
restore print
announcem
schedule]
ents
1 Refer to the Report Scheduler and System Printer feature specification for more details.
Feature Interactions
!
WARNING:
Manager I is blocked for other activities until the command completes (up to
45 minutes)
If no announcement data module and no NETCON data module are
administered, the system denies the command.
If the announcement data module port is out of service or active (for
example, performing an announcement playback), the system denies the
command.
If users are in integrated announcements sessions, the system denies the
command.
If the board is currently uploading or downloading, the system denies the
command. Users cannot save or restore announcement after the restore
announcements command commences.
If no tape is in the tape drive when users attempt a copy, the command
aborts.
If the MSS is in use by another user or maintenance, the restore
announcements command is not allowed.
Unsaved or corrupted announcement files on the MSS, disallow the
restore announcements command.
8-278 Issue 4 May 2002
Qualifier Description
Report sent to printer.
Command is validated and
then a scheduling form
displays to schedule execution
of the command. The
command is then placed in the
command queue and is
executed at the specified time.
The information displayed by
the command is sent to the
system printer instead of the
1
screen.
Examples:
restore announcements
Logins Defaults
init Tape-based:
inads Announcement
craft copies from active
cust processor's tape to
rcust the announcement
board.
Card-mem based:
Announcement
data copies from
active processor's
to the
announcement
board.
Feature
Interactions
see below
555-233-123