Netstat Ip-Route - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids
Service State
Maintenance
Busy
CA-TSC State

netstat ip-route

Use netstat ip-route to display routing tables that are resident in the C-LAN and
VAL circuit packs. Use the "board" option ( netstat ip-route board UUCss ) to
display the routing tables that are resident on a specific C-LAN or VAL board.
Action/
Object Qualifier
netstat board
ip-route UUCss
Output
The following example shows the output from netstat ip-route .
netstat ip-route
Bd/Pt Destination
01E0517 0.0.0.0
01E0518 127.0.0.1
01B0907 172.17.17.165 172.17.17.165
01B1233 0.0.0.0
01B1218 127.0.0.1
8-238 Issue 4 May 2002
In-service/active, in-service/idle, out-of-service, out-of-service-NE
(Near End), out-of-service-FE (Far End), maint-NE/active,
maint-FE/active, maint-NE/idle, maint-FE/idle,
pending-in-service, pending-maint, or disconnected.
NE (Near End) and FE (Far End) refer to the "end" of the trunk
that has placed the facility in its current state.
This field identifies maintenance testing that occurs on the trunk.
The state of temporary signaling connections. (connection set up
to pass call information over PRI signaling links).
Qualifier Description
Example:
netstat ip-route board 01A03
IP ROUTING
Gateway
172.17.17.254
127.0.0.1
0.0.0.0
127.0.0.1
Logins Default
init none
inads
craft
Page 1 of x
Subnet Mask Interface
0.0.0.0 cpm0
255.255.255.255 1o0
255.255.255.255 ppp6
0.0.0.0 motfec0
255.255.255.255 1o0
Feature
Interactions
none
555-233-123