Avaya Definity SI Maintenance Manual page 1137

CARD-MEM (Memory Card)
Table 10-134. TEST #693 Memory Card Erase/Write/Read Test — Continued
Error
Code
2115 ABORT
2117 ABORT
104 FAIL
105 FAIL
106 FAIL
107 FAIL
110 FAIL
PASS
555-233-123
Test
Result
Write-protect switch in "protected" position.
1. Remove the memory card from the Processor circuit pack
slot.
2. Push write-protect switch into "not protected" position.
3. Insert the memory card firmly into the Processor circuit pack
slot.
4. Retry the command at 1-minute intervals, up to 5 times.
5. If the problem persists, escalate the problem.
Translation file not on memory card.
1. Verify that the memory card saves translations (save
translation).
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
Corrupt and irrecoverable directories.
Cannot write "0" to the memory card.
Cannot erase memory card.
Cannot write data into memory card after erasing.
1. Replace the memory card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
Cannot write to old memory card (pre-g3v9). Card format is
post-g3v8.
1. Replace with proper card.
The memory card successfully performs the erase, write, and
read operations.
Description/Recommendation
Continued on next page
Issue 4 May 2002 10-351