Avaya Definity SI Maintenance Manual page 579

status conference
Rate Adpt
Bond Mode
Ts
555-233-123
Rate adaptation/Interworking indicator (5, 6, y, c, e, n, blank).
5 and "6" apply to Low Speed/High Speed Interworking. All other
values apply to Rate Adaptation.
"5" = 56-kbps (Low Speed) endpoint joins a High Speed (128
kbps or above) conference. This endpoint connects with audio
only capability but is not a valid video source and destination.
"6" = 64-kbps (Low Speed) endpoint joins a High Speed (128
kbps or above) conference. This endpoint connects with audio
only capability but is not a valid video source and destination.
"y" = Endpoint joins the conference at 64 kbps, but because rate
adaptation to 56 kbps is triggered by another endpoint, this
endpoint rate adapts to 56 kbps.
"c "= The administered conference bandwidth is 64 kbps. This
endpoint joins the conference at 56 kbps. The first 56 kbps
endpoint that joins 64 kbps rate adaptable conferences triggers
rate adaptation (see Join Time below).
"n" = Another endpoint triggers a 64-kbps conference to rate
adapt to 56 kbps. This endpoint joins the conference at 64 kbps,
but encounters problems in rate adapting to 56 kbps. This
endpoint may have audio and may be receiving video, but is not
a valid video source.
"blank" Rate adaptation was not triggered by any endpoint. If
this endpoint is in use and connected, it joins the conference at
the administered bandwidth.
BONDing Mode = blank for calls that are unrelated to bonding.
"t" = The endpoint detects voice energy (talking).
"m" = The endpoint indicates to the MCU that it is muted. It is
possible for an endpoint to mute, but not send any indication to
the MCU. In this situation the MCU does not display a mute
indication.
"M" = UDD/CRCS Agent interface mutes the endpoint's audio.
Both the endpoint and the UCC/CRCS Agent must mute the
endpoint audio.
"S" = The solo-audio state set by UCC/CRCS Agents mutes the
endpoint's audio. While in solo-audio state, new endpoints that
join the conference automatically mute.
"blank" = Voice energy (talking) is not detected from the
endpoint.
Issue 4 May 2002 8-329