Test Failed Ip-Network-Region - Avaya Definity SI Maintenance Manual

test failed ip-network-region

The following example show the output for test environment 2, where cabinet 2
is an SCC cabinet.
test environment 2
Port Maintenance Name
02 DC-POWER
02 EMG-XFER
02 EXT-DEV
02 RING-GEN
02 RING-GEN
Command Successfully Completed
test failed ip-network-region
test failed ip-network-region
The test failed ip-network-region command initiates a real-time ping test for
failed network-regions connections. The default is ALL failed ip-network regions.
Otherwise, test failed ip-network-region xxx, where xxx is in the range of 1-250
for r and 1-80 for si/csi/d)
Output
The following display shows a typical result for test failed ip-network-region.
test failed-ip-network-region
No failures for indicated region(s)
555-233-123
TEST RESULTS
Alt. Name Test No. Result
5 PASS
124 PASS
120 PASS
117 PASS
118 PASS
Error Code
Issue 4 May 2002 8-439