Removing The Tool - GRAPHTEC CE7000-130AP User Manual

2
While pushing up the tool holder, push until its flange
completely touches the upper part of the holder.
3
Make sure that the tool bracket is engaged on the tool's
flange, and then tighten the screw.

Removing the tool

When removing the tool, turn it counterclockwise to remove the tool.
Bracket to hold tool
Tool holder (Forward)
Top view
Bracket to hold tool
Tool holder
Flange
This tool holder is not set backward.
Flange
2-6
Supplement
Set the tool in the tool holder (forward).