Advertisement
Introduction
The RocketLinx ES8105-GigE and ES8108-GigE are industrial Ethernet switches with full
Gigabit ports that are backward compatible (10/100/1000BASE-TX). The ES8105-GigE has
five Gigabit ports and the ES8108-GigE has eight Gigabit ports. The ES8105-GigE and
ES8108-GigE are referred to as the switch in the remainder of the Guide unless
model-specific information is required.
The switches conform to IEEE802.1p Class of Service, IEEE802.1Q Quality of Service for
packet forwarding precedence, and IEEE802.3x Flow Control standards. The switches
provide 9.6K bytes Jumbo frame (Gigabit) for large file transmission and supports broadcast
storm packet filtering.
The switches feature a compact IP31 rigid aluminum case for operation in harsh
environments (-10°C to 70 C). They also feature an alarm relay to notify users of a port link or
power failure. The switches can be powered using a wide input power range of 12-48VDC
using the 6-pin terminal block.
Setting the DIP switch
The RocketLinx switches have a DIP switch located on the bottom panel to configure the port
link or power failure alarm.
ES8105-GigE
DIP 1 to DIP 5
DIP 6
ES8108-GigE
Status
On
DIP 1 to DIP 8
Off
On
DIP 9
Off
ES8105-GigE
Enables the port link down alarm on the corresponding port.
Disables the port link down alarm on the corresponding port.
Enables the power failure alarm.
Disables the power failure alarm.
1
ES8108-GigE
Description
Advertisement
