Display Configuration; Phases Displayed; Auto Scroll Display; Enable On Face Plate Of Display - Electro Industries Shark 200 Installation & Operation Manual

Display Configuration

The settings on this screen determine the display configuration of the meter's
faceplate.
NOTE: For a Shark® 200T transducer, the Display Configuration setting does not
apply as there is no display.
The screen fields and acceptable entries are as follows:
Phases Displayed: A; A and B; A, B, and C. This field determines which phases are
displayed on the faceplate. For example, if you select A and B, only those two phases
will be displayed on the faceplate.
Auto Scroll Display: Yes or No. This field enables/disables the scrolling of selected
readings on the faceplate. If enabled, the readings scroll every 5 seconds.
Enable on Face Plate of Display: Check the boxes of the Readings you want
displayed on the faceplate of the meter. You must select at least one reading.
Power Direction: View as Load or View as Generator; this controls how energy is
accumulated in the Shark® meter. View as Load means the energy readings are accu-
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
#
Doc E149701 5-16