Configuration Mode Screens - Electro Industries Shark 200 Installation & Operation Manual

CONFIGURATION
ENTER
MENU:
SCRL (blinking)
CT
PT
DOWN
MENU
CONFIGURATION
ENTER
MENU:
CT (blinking)
PT
CNCT
DOWN
MENU
CONFIGURATION
MENU:
PT (blinking)
CNCT
PORT
DOWN
MENU
DOWN
CONFIGURATION
MENU:
CNCT (blinking)
PORT
MENU
ENTER
2
PASS
DOWN
MENU
CONFIGURATION
MENU:
PORT (blinking)
2
PASS
SCRL
2
DOWN
2
MENU
CONFIGURATION
MENU:
2
PASS (blinking)
SCRL
CT
The Configuration Menu screen
scrolls through 6 choices, showing 3
at a time. The top choice is always
the "active" one, indicated by
blinking the legend.
MENU
any changes? yes
STOR
ALL?
yes (blinking)
no
MENU
STOR
to Main Menu
MENU
ALL?
see sheet 1 no (blinking)
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions

Configuration Mode Screens

SCROLL EDIT:
SCRL DOWN or
3
yes or no RIGHT
(choice blinking if edit)
ENTER
CT NUMERATOR EDIT:
CT-N
DOWN RIGHT
####
increment blink
(one # blinking if edit)
blinking next
digit digit
ENTER
PT NUMERATOR EDIT:
PT-N
DOWN RIGHT
####
increment blink
(one # blinking if edit)
blinking next
digit digit
ENTER
CONNECT EDIT:
CNCT DOWN or
1 of 3 choices RIGHT
(choice blinking if edit)
choice
ENTER
ENTER
ADDRESS EDIT:
ADR
DOWN RIGHT
###
increment blink
(one # blinking if edit)
blinking next
digit digit
ENTER
PASSWORD EDIT:
DOWN PASS RIGHT
increment blink
#### (one # blinking)
blinking next
digit digit
MENU
(per row of the originating screen)
save new
SAVE YES:
ENTER
configuration
SAVE CONFIRM:
STOR
ALL
RIGHT
RIGHT DONE
2 sec.
SAVE NO:
reboot
ENTER
A: Shark® 200 Meter Navigation Maps
toggle
scroll
setting
ENTER
CT DENOMINATOR
SHOW:
CT-D
1 or 5
ENTER
ENTER
PT DENOMINATOR EDIT:
PT-D
DOWN
####
increment
(one # blinking if edit)
blinking
digit
ENTER
CNCT choices:
3 EL WYE,
2 CT DEL,
2.5EL WYE
show
next
ENTER
BAUD EDIT:
BAUD DOWN or
##.# RIGHT
(choice blinking if edit)
2
ENTER
Notes:
1. Initial access is view-only. View access shows the existing settings. At the first attempt to change a
setting (DOWN or RIGHT pressed), password is requested (if enabled) and access changes to edit. Edit
access blinks the digit or list choice eligible for change and lights the PRG LED.
2. Skip over password edit screen and menu selection if access is view-only or if password is disabled.
3. Scroll setting may be changed with view or edit access.
4. ENTER accepts an edit; MENU abandons it.
first DOWN or RIGHT in view
access (if password required)
increment
blinking
digit
no
to previous operating mode
screen
#
Doc E149701
See Note 1
ENTER
CT MULTIPLIER EDIT:
CT-S DOWN or
1 or 10 or 100 RIGHT
(choice blinking if edit) show
next
choice
ENTER
PT MULTIPLIER EDIT:
PT-S DOWN or
RIGHT
1 or 10 or 100 or 1000 RIGHT
blink
(choice blinking if edit) show
next
next
digit
choice
PROT choices:
MOD RTU,
MOD ASCI,
DNP
ENTER
PROTOCOL EDIT:
PROT DOWN or
1 of 3 choices RIGHT
show (choice blinking if edit) show
next next
choice choice
See Note 1
CONFIGURATION
INPUT PASSWORD:
DOWN PASS RIGHT
### (one # blinking) yes
blink
next
digit
ENTER
is password correct?
to the originating
EDIT screen
A-5