Using Operating Mode; Possible Readings - Electro Industries Shark 200 Installation & Operation Manual

6.2.6: Using Operating Mode

Operating mode is the Shark® 200 meter's default mode, that is, the standard front
panel display. After starting up, the meter automatically scrolls through the parameter
screens, if scrolling is enabled. Each parameter is shown for 7 seconds, with a 1 sec-
ond pause between parameters. Scrolling is suspended for 3 minutes after any button
is pressed.
1. Press the Down button to scroll all the parameters in Operating mode. The
currently "Active," i.e., displayed, parameter has the Indicator light next to it, on
the right face of the meter.
2. Press the Right button to view additional readings for that parameter. The table
below shows possible readings for Operating Mode. Sheet 2 in Appendix A shows
the Operating mode Navigation map.
NOTE: Readings or groups of readings are skipped if not applicable to the meter type
or hookup, or if they are disabled in the programmable settings.
OPERATING MODE
PARAMETERS
Voltage L to
Neutral Display
Voltage Line to Line
Display
Current Display
Power Display
Apparent Power/
Frequency Display
Active Energy
Display
Reactive Energy
Display
Apparent Energy
Display
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
voltage line to voltage line to
neutral neutral max
voltage line to voltage line to
line line max
current neutral current
watt watt max Q1,4
VAR VAR max Q1,2
PF PF max Q1,4
VA VA max
frequency frequency max
watt hour Q1,4 watt hour Q2,3
VAR hour Q1,2 VAR hour Q3,4
VA hour
6: Using the Shark® 200 Meter

POSSIBLE READINGS

voltage line to
neutral min
voltage line to
line min
current max
watt min Q1,4
VAR min Q1,2
PF min Q1,4
VA min
frequency min
watt hour net
VAR hour net
#
Doc E149701
voltage line
to neutral
THD (V3 and
above)
voltage line to
line THD (V3
and above)
current min current THD
(V3 and above)
watt max Q2,3 watt min Q2,3
VAR max Q3,4 VAR min Q3,4
PF max Q2,3 PF min Q2,3
watt hour total
VAR hour total
6-15