Shark 200 Meter Device Profile Settings; Ct, Pt Ratios And System Hookup - Electro Industries Shark 200 Installation & Operation Manual

5.2.2.1: Shark® 200 Meter Device Profile Settings
IMPORTANT! Modification to the Device Profile may cause improper Option card
operation due to changed Scaling, etc. Verify or update programmable settings
related to any Option cards installed in the Shark® 200 meter.
NOTE: Only the basic Shark® 200 meter Device Profile settings are explained in this
manual. Refer to Chapter 8 in the Communicator EXT
Software User Manual for detailed instructions on configuring all settings of the
meter's Device Profile. You can view the manual online by clicking Help>Contents
from the Communicator EXT

CT, PT Ratios and System Hookup

IMPORTANT! You have two options for entering the CT and PT settings. You can
either enter CT/PT Numerator, Denominator, and Multiplier manually (see following
instructions), or you can enter the Ratios for CT/PT Numerator and Denominator and
click the Update CT/Update PT buttons to let the software calculate the Numerator,
Denominator, and Multiplier for you. You can then empty the Ratio fields and click the
Update Ratio buttons to confirm the calculated settings: you will see the same ratios
you initially entered.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
TM
Main screen.
#
Doc E149701
TM
4.0 and MeterManager EXT
5-13