Display Showing Watt-Hour Reading; Using The Main Menu - Electro Industries Shark 200 Installation & Operation Manual

The Shark® 200 meter continues to provide scrolling readings until one of the but-
tons on the front panel is pressed, causing the meter to enter one of the other Modes.

6.2.2: Using the Main Menu

1. Press the Menu button. The Main Menu screen appears.
• The Reset: Demand mode (rStd) appears in the A window. Use the Down button to
scroll, causing the Reset: Energy (rStE), Configuration (CFG), Operating (OPr), and
Information (InFo) modes to move to the A window.
• The mode that is currently flashing in the A window is the "Active" mode, which
means it is the mode that can be configured.
MENU ENTER
-
-
-
For example: Press Down Twice - CFG moves to A window. Press Down Twice - OPr moves to
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
MENU
MAX
MIN
-
LM1
LM2
%THD
0000
PRG
-
lrDA
120%- 0.659
-
90%-
60%-
30%-
%LOAD
Figure 6.3: Display Showing Watt-hour Reading
MENU
-
A
-
B
-
C
6: Using the Shark® 200 Meter
ENTER
VOLTS L-N
VOLTS L-L
AMPS
A
W/VAR/PF
VA/Hz
Wh
VARh
B
VAh
C
Wh Pulse
KILO
MEGA
ENTER
-
A
-
B
-
C
A
#
Doc E149701
MENU ENTER
A
B
C
window.
6-4