Electro Industries Shark 200 Installation & Operation Manual page 89

5.2.2: Connecting to the Meter through Communicator EXT
Software
How to Connect:
1. Open the Communicator EXT
2. Click the Connect icon in the Icon bar.
3. The Connect screen opens, showing the Default settings. Make sure your settings
are the same as shown here. Use the pull-down menus to make any necessary
changes to the settings.
4. Click the Connect button. If you have a problem connecting, you may have to
disconnect power to the meter, then reconnect power and click the Connect button,
again.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
TM
software.
#
Doc E149701
TM
5-9