Electro Industries Shark 200 Installation & Operation Manual page 338

3. From the Tree menu on the left side of the screen, click on the + sign next to the
IEC 61850 Protocol Ethernet Network Option card (Option Card 1 or Option Card
2), then click Comm>Network>IP Addresses and DNS.
4. Fill in the information on this screen.
• Computer Name: the name of the device on the network (accessed through the
Network card)
• IP Address: the IP v4 address for the unit on the network.
• Subnet Mask: the IP v4 mask, which identifies the sub-network to which the unit
belongs.
• Default Gateway: the IP v4 address of the gateway device on the network.
• Domain Name Server 1 and 2: if DNS is used, the IP addresses of the DNS
server(s) on the network.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
E: Using the IEC61850 Network Card
#
Doc E149701 E-18