Limits; To Set Up A Limit - Electro Industries Shark 200 Installation & Operation Manual

Limits

Limits are transition points used to divide acceptable and unacceptable measure-
ments. When a value goes above or below the limit an out-of-limit condition occurs.
Once they are configured, you can view the out-of-Limits (or Alarm) conditions in the
Limits log or Limits polling screen. You can also use Limits to trigger relays. See the
Communicator EXT
The current settings for Limits are shown in the screen. You can set and configure up
to eight Limits for the Shark® 200 meter.

To set up a Limit:

1. Select a Limit by double-clicking on the Assigned Channel field.
2. You will see the screen shown below. Select a Group and an Item for the Limit.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
TM
4.0 and MeterManager EXT Software User Manual for details.
5: Communication Installation
#
Doc E149701 5-24