Ethernet Communication; Embedded Web Server - Electro Industries Shark 200 Installation & Operation Manual

8.4.1: Ethernet Communication

The INP100S enables high-speed Ethernet communication with up to 12 simultaneous
connections for Modbus TCP. The card supports a static IP address and is treated like
a node on the network.

8.4.2: Embedded Web Server

The INP100S gives the meter a Web server that is viewable over the Ethernet by
almost all browsers. The Shark® Series webpages allow you to see the following
information for the Shark® 200 meter:
• Voltage and current readings
• Power and Energy readings
• Power quality information
• General meter information
• You can also upgrade the Ethernet (Network) card's firmware, Reset the Ethernet
card, configure email notification, and set up Data Push from the meter's Infor-
mation webpage.
The INP100S card also supports the "keep alive" feature - see 8.4.5: Keep-Alive Fea-
ture on page 8 - 24.
Follow these steps to access the Shark® 200 meter's webpages:
1. Open a standard Web browser from your PC, smart phone, or tablet.
2. Type the Ethernet Card's IP address in the address bar, preceded by "http://".
For example: http://172.20.167.99
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-3