Electro Industries Shark 200 Installation & Operation Manual page 108

• Line (line frequency synchronization) from the Method pull-down menu
• 50 Hz or 60 Hz from the Line Frequency pull-down menu
IMPORTANT! When you finish making changes to the Device Profile, click Update
Device to send the new Profile settings to the meter.
NOTE: Refer to Chapter 8 of the Communicator EXT
Software User Manual for additional instructions on configuring the Shark® 200
meter settings, including Transformer and Line Loss Compensation, CT and PT
Compensation, Option card configuration, Secondary Voltage display, Symmetrical
Components, Voltage and Current Unbalance, and scaling Primary readings for use
with DNP.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
TM
4.0 and MeterManager EXT
#
Doc E149701 5-28