Configuring The Scroll Feature; To Enable Or Disable Auto-Scrolling - Electro Industries Shark 200 Installation & Operation Manual

6.2.5.1: Configuring the Scroll Feature

When in auto-scrolling mode, the meter performs a scrolling display, showing each
parameter for 7 seconds, with a 1 second pause between parameters. The parameters
that the meter displays are determined by the following conditions:
• They have been selected through software (see the Communicator EXT
MeterManager EXT Software User Manual for instructions).
• They are enabled by the installed V-Switch
nology on page 2-8).

To enable or disable auto-scrolling:

1. Press the Enter button when SCrl is in the A window.
The Scroll YES screen appears.
2. Press either the Right or Down button if you want to
access the Scroll no screen. To return to the Scroll
YES screen, press either button.
3. Press the Enter button on either the Scroll YES
screen (to enable auto-scrolling) or the Scroll no
screen (to disable auto-scrolling).
4. The CT- n screen appears (this is the next Configura-
tion mode parameter).
NOTES:
• To exit the screen without changing scrolling options, press the Menu button.
• To return to the Main Menu screen, press the Menu button twice.
• To return to the scrolling (or non-scrolling) parameters display, press the Menu
button three times.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
6: Using the Shark® 200 Meter
TM key (see 2.1.3: V-Switch
MENU
-
-
-
MENU
-
-
-
#
Doc E149701
TM
4.0 and
TM
Key Tech-
ENTER
A
B
C
ENTER
A
B
C
6-9