Electro Industries Shark 200 Installation & Operation Manual page 320

22. In the Connect screen, enter the connection settings as shown below, but with
whatever port your adapter is connected to.
(Refer to Chapter 3 of the Communicator EXT
User Manual for detailed connection instructions.)
IMPORTANT! You must keep the adapter pointing at the meter's IrDA port. If
it is moved away from the port, you will lose connection to the meter. In that case, re-
peat step 21 to re-connect to the meter (you may need to click the Disconnect icon in
the Communicator EXT
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
Software's Main screen and then click Connect).
TM
Doc
D: Using the USB to IrDA Adapter
TM
4.0 and MeterManager EXT Software
#
E149701 D-8