Upgrading The Ethernet Card’s Firmware - Electro Industries Shark 200 Installation & Operation Manual

• Configuring Email Notification (see 8.4.2.3: Email Notification on page 8 -
14).
• Setting up the Lucid BuildingOS client (see see 8.4.2.4: Data Push on
page 8 - 20).
NOTE: The Shark® 270 meter's Device Profile must be set up before configuring
keep-alive or email settings in the Network card. See Chapter 8 in the Communicator
TM
EXT 4.0 and MeterManager EXT Software User Manual for instructions.
8.4.2.1: Upgrading the Ethernet Card's Firmware
From one of the Shark® 200 meter's webpages:
1. Click Information on the left side of the webpage.
2. Click Upgrade Network Card (bottom box on the right). You will see the webpage
shown below.
NOTE: In order to upgrade the Network (Ethernet) Card, you must be using the PC
on which the upgrade file is stored.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-11