Electro Industries Shark 200 Installation & Operation Manual page 33

• Multifunction measurement including voltage, current, power, frequency, energy,
etc.
• Optional secondary Voltage display (see Chapter 8 in the Communicator EXT
and MeterManager EXT Software User Manual for instructions on setting up this
feature*)
• Power quality measurements (%THD and Alarm Limits) - for meters with
V-Switch™ keys 3-6, symmetrical components, Voltage unbalance, and current
unbalance are also available and can be used with the Limits functionality (see
Chapter 8 in the Communicator EXT
Manual for instructions on using this feature*)
• V-Switch™ Key technology - field upgradeable without removing installed meter
• Percentage of Load bar for analog meter reading
• 0.001% Frequency measurement for Generating stations
• Interval energy logging
• Line frequency time synchronization
• Easy to use faceplate programming
• IrDA port for laptop PC remote read
• RS485 communication
• Optional I/O Cards (including 10/100BaseT Ethernet) - field upgradeable without
removing installed meter; Relay control though DNP over Ethernet is enabled with
the Ethernet Option card
• Sampling rate of up to 512 samples per cycle for waveform recording
• Transformer/Line Loss compensation (see Chapter 8 and Appendix A in the Com-
municator EXT
on using this feature*)
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
TM
TM
4.0 and MeterManager EXT Software User Manual for instructions
2: Meter Overview and Specifications
4.0 and MeterManager EXT Software User
#
Doc E149701
TM
4.0
2-3