Default Configuration - Electro Industries Shark 200 Installation & Operation Manual

7.9.2: Default Configuration

The Shark® 200 meter automatically recognizes the installed Option card during
power up. If you have not programmed a configuration for the card, the unit defaults
to the following:
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
7.9.3: Wiring Diagram
Pin 1
IMPORTANT! The INP100S uses an auto-detecting circuit that automatically
switches the transmit and receive in order to properly align communication. Because
of this, when you are communicating directly to a meter with a PC or a switch, a
straight cable can be used.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
10/100
BaseT
Ethernet
RJ45 Plug
ACTIVE
8
7
6
5
4
LINK
3
2
1
Total
WEB
Solutions
Figure 7.8: 10/100BaseT Ethernet Card
Doc
7: Using the I/O Option Cards
RD-
Cable
RD+
TD-
TD+
#
E149701 7-19