b. Enter the Server port. Usually this is 25, but check with your system administra-
tor in case you are using a different port.
c. If your email server requires authorization, click the checkbox next to Yes and
enter the Username and Password.
d. Click the Next button.
4. The next screen you will see is Watched Events.
This screen lets you select the conditions that will cause an alarm or notification
email to be sent, e.g, Relay Change or Unit Startup.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc
E149701
8-15