Electro Industries Shark 200 Installation & Operation Manual page 173

7. Enter the seconds interval for pushing (sending) the data (meter readings) to the
server; e.g., if you enter 300, the meter readings will be sent every 300 seconds.
Avoid using very small values for the interval in order to reduce the network traffic.
For Billing applications, set this values between 300 and 900 seconds (5 to 15 min-
utes).
8. Click Next. You will see the webpage shown below.
9. In the Data Points webpage, you select the meter readings you want to be pushed
(sent) to the cloud server. You can select up to 15 values. The selected data points
have a dark circle inside the larger circle. Click on the circle to the left of a meter
reading to select it - click again to de-select it.
10. Enter the password: 1Uc!dPu5H
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-23