Log Retrieval Header - Electro Industries Shark 200 Installation & Operation Manual

To get the current Com Port, see the NOTE on querying the port, on the previous
page.

Log Retrieval Header:

The Log Retrieval Header is used to program the log to be retrieved, the record(s) of
that log to be accessed, and other settings concerning the log retrieval.
Registers:
Size:
Bytes Value
0-1 Log Number,
Enable,
Scope
2-3 Records per
Window,
Number of
Repeats
• Log Number: The log to be retrieved. Write this value to set which log is being
retrieved.
0
1
2
3
4
5
10
11
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
0xC34F - 0xC350
2 registers
Type Format
UINT16 nnnnnnnn esssssss
UINT16 wwwwwwww nnnnnnnn
System Events
Alarms
Historical Log 1
Historical Log 2
Historical Log 3
I/O Change Log
PQ Event Log
Waveform Log
Doc
B: Modbus Map and Retrieving Logs
Description
nnnnnnnn -
log to
retrieve,
e - retrieval
session
enable
sssssss -
retrieval
mode
wwwww-
www -
records per
window,
nnnnnnnn -
repeat count
#
E149701
# Bytes
2
2
B-13