Time Settings - Electro Industries Shark 200 Installation & Operation Manual

NOTES:
• If you are entering negative Limits, be aware that the negative value affects the
way the above and below Limits function, since negative numbers are processed as
signed values.
• If the Above Return Hysteresis is greater than the Above Setpoint, the Above Limit
is Disabled; if the Below Return Hysteresis is less than the Below Setpoint, the
Below Limit is Disabled. You may want to use this feature to disable either Above or
Below Limit conditions for a reading.

Time Settings

Use this setting to enable or disable Daylight Savings Time for the meter, to set the
beginning and ending times for Daylight Savings Time, and to set up Time Zone infor-
mation and clock synchronization information.
From the Tree Menu, click General Settings>Time Settings.
Check the box to Enable Daylight Savings time, or un-check it to Disable Daylight
Savings Time.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
5: Communication Installation
#
Doc E149701 5-26