Electro Industries Shark 200 Installation & Operation Manual page 175

WARNING! Only modify these settings if you are knowledgeable about them, since
setting them incorrectly can lead to unstable connections.
To access the Keep-Alive setting screen, key the following into your web browser's
address bar:
http://xx.xx.xx.xx/sys/setup_keepalive_ssi.htm
, where xx.xx.xx.xx is your INP100S card's IP address. You will see the screen shown
below.
• You can click on the On button to turn off the keep-alive feature for a protocol The
button will turn red and say Off.
• For each protocol, you can enter a keep-alive time and interval in seconds.
• For each protocol, you can enter the number of retries, in the event of communica-
tion failure, before the communication socket is closed.
• Enter the password (the default is chgK339@).
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-25