Electro Industries Shark 200 Installation & Operation Manual page 317

13. Click Close and restart your PC.
IMPORTANT! Do NOT remove the Installation CD until the entire procedure
has completed.
14.Position the USB to IrDA Adapter so that it points directly at the IrDA on the front
of the Shark® meter. It should be as close as possible to the meter, and not more
than 15 inches/38 cm away from it.
15. You should see a small message on your PC telling you that a computer is nearby.
This means that the Infrared Adapter has "found" the meter. You may need to
unplug and re-attach the adapter cable if you don't see the message right away.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
D: Using the USB to IrDA Adapter
#
Doc E149701 D-5