Change The Password; Change The Meter Identification - Electro Industries Shark 200 Installation & Operation Manual

• Enabling Password protection prevents unauthorized tampering with devices.
When a user attempts to make a change that is under Password protection,
Communicator EXT
correct password is not entered, the change does not take place.
IMPORTANT! You must set up a password before enabling Password protection.
Click the Change button next to Change Password if you have not already set up a
password.
• Change the Password: click the Change button. You will see the Enter the New
Password screen, shown below.
1. Type in the new password (0 - 9999).
2. Retype the password.
3. Click Change. The new password is saved and the meter restarts.
NOTE: If Password protection has already been enabled for configuration and
you attempt to change the password, you will see the Enter Password screen
after you click Change. Enter the old password and click OK to proceed with
the password change.
• Change the Meter Identification: input a new meter label into the Meter Designation
field.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
TM
software opens a screen asking for the password. If the
Doc
5: Communication Installation
#
E149701 5-23