Installation Procedures; D: Using The Usb To Irda Adapter (Cab6490) - Electro Industries Shark 200 Installation & Operation Manual

D: Using the USB to IrDA Adapter (CAB6490)

D.1: Introduction
Com 1 of the Shark® 200 meter is the IrDA port, located on the face of the meter.
One way to communicate with the IrDA port is with EIG's USB to IrDA Adapter
(CAB6490), which allows you to access the Shark® 200 meter's data easily from a
laptop PC. This Appendix contains instructions for installing the USB to IrDA Adapter.
D.2: Installation Procedures
The USB to IrDA Adapter comes packaged with a USB cable and an Installation CD.
1. Connect the USB cable to the USB to IrDA Adapter, and plug the USB into your PC's
USB port. Your computer's operating system may find the driver for the adapter
automatically. If it doesn't, continue to step 2.
2. Insert the Installation CD into your PC's CD ROM drive.
3. Open the CD drive and locate the folder for the Operating System you have.
4. Inside the folder is an installation application, called Setup. Double-click on Setup.
You will see the screen shown below.
5. Select the language you want and click OK.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
D: Using the USB to IrDA Adapter
#
Doc E149701 D-1