Electro Industries Shark 200 Installation & Operation Manual page 318

16.Click: Start>Settings>Control Panel>System>Hardware>Device Manager, or
follow whatever path you need to open the Device Manager (this is dependent on
your operating system).
17.The USB to IrDA Adapter should appear under both Infrared Devices and Modems
(click on the + sign to display all configured modems).
NOTE: If the Adapter doesn't show up under Modems, move it away from the
meter for a minute and then position it pointing at the meter's IrDA port, again.
18.Double-click on the Standard Modem over IR link (this is the USB to IrDA
Adapter). You will see the Properties screen for the Adapter.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
D: Using the USB to IrDA Adapter
#
Doc E149701 D-6