Default Configuration - Electro Industries Shark 200 Installation & Operation Manual

Reset/Default output value:
The general specifications are as follows:
Operating temperature:
Storage temperature:
Relative air humidity:
EMC - Immunity Interference:
Weight:
Dimensions (inch) W x H x L:
External connection:

7.4.2: Default Configuration:

The Shark® 200 meter automatically recognizes the installed Option card during
power up. If you have not programmed a configuration for the card, the unit defaults
to the following outputs:
Channel 1
Channel 2
Channel 3
Channel 4
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
7: Using the I/O Option Cards
0 mA
(-20 to +70) °C
(-40 to +80) °C
Maximum 95%, non-condensing
EN61000-4-2
1.6 oz
0.72 x 2.68 x 3.26
AWG 12-26/(0.29 - 3.31) mm
5 pin, 0.200" pluggable terminal block
+Watts, +1800 Watts => +1 mA
-Watts, - 1800 Watts => -1 mA
+VARs, +1800 VARs => +1 mA
- VARs, -1800 VARs => -1 mA
Phase A Voltage WYE, 300 Volts => +1 mA
Phase A Voltage Delta, 600 Volts => +1 mA
Phase A Current, 10 A => +1 mA
#
Doc E149701
2
7-5