E.3: Viewing The Iec 61850 Protocol Ethernet Network Card's System Log - Electro Industries Shark 200 Installation & Operation Manual

• The default .cid in the INP300S card is for demonstration only. It must be modified
to suit the actual application needs.
• The default .cid in the INP300S has the arbitrary IED name of SHARK200IEC, which
must be replaced by the user's own name.
E.3: Viewing the IEC 61850 Protocol Ethernet Network Card's
System Log
The IEC 61850 Protocol Ethernet Network card's main webpage (Information
webpage) has general information on the status of the card (e.g., version, healthy,
serial number) and the status of the IEC 61850 server (e.g., ok, errors in the
uploaded .cid file).
In addition to this information there is a System log, which contains events (e.g.,
errors and warnings) from the IEC 61850 protocol layer, including problems found
when parsing the .cid file. To view the System log's webpage, click Log View from the
left side of the Information webpage.
You will see a screen similar to the one shown above. Oldest messages appear first on
the screen. The buttons at the bottom of the screen let you navigate through the
message pages (Start, Back, Next, Last) or remove all of the messages (Clear).
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
E: Using the IEC61850 Network Card
#
Doc E149701 E-26